Can Electrical Tape Be Used To Repair Wire Insulation

Liquid Tape is a rubber coating that takes the identify of electrical tape by providing electrical insulation to difficult-to-attain places.

Brush-In-Cap Container:

Surface must be clean and dry. For all-time results avoid straight sunlight, loftier humidity or informal conditions. Using brush cap, stir gently and thoroughly before each utilize. Always disconnect ability earlier making repairs allowing Liquid Tape to thoroughly dry before restoring power. Follow local electrical codes.

Liquid Tape can be used over existing connections using connectors, solder record and shrink tube.
Utilise Liquid Record to connection or repair area. Make certain to completely coat repair for air- and water-tight seal.
Let ten minutes minimum between coats. A minimum of two coats is recommended.
Allow 4 hours minimum dry time before use.

Tips for Brush-In-Cap Container:

If thinning is desired, product thickens, or for cleanup, utilize naphtha, xylene, or toluene solvents. Allow four hours per coat for consummate dry. Keep container tightly closed when not in use.

Aerosol Container:

Surface must exist clean and dry. For best results avoid direct sunlight, high humidity, or informal weather.

Agree can 12-sixteen" from surface, moving can back and forth slightly overlapping each stroke. Apply heavy plenty to produce an even, moisture appearance.
Allow 30 minutes minimum between coats. Utilise as many coats as desired (3-4 average).
Allow 4 hours minimum dry out fourth dimension earlier use. Always disconnect ability before making repairs, allowing Liquid Tape to thoroughly dry before restoring power. Follow local electrical codes.

Tips for Aerosol Container:

E'er protect surrounding areas from overspray. Allow 4 hours per coat for complete dry out. If runs or sags are experienced, move tin further away from surface. To avert clogged nozzle, plough tin can upside downward and spray for five seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Practice not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for cleanup. Exercise not coat surface in one awarding as bubbles may announced in the stale pic; reducing its insulation properties.

Caution: Plough off power earlier starting electric work and follow your local electrical codes.

Provides excellent protection from acrid, alkali metal, and abrasion
Seals out moisture and salt
Strongest dielectric protection on the marketplace
Protects electrical connections on wires, cables, alarms, electronics
Will not harden, unravel or become brittle in extreme weather weather

Liquid Record can be used in many applications including electric connections for boats, trailers, RVs, trucks, automobiles, timers, pool electricals, bilge pumps, sprinkler pumps, instruments, computers, excursion boards, switches, and stop final screws from vibrating loose.

The 4 oz. brush-in-cap container colors come in Blackness and Red.
The half dozen oz. aerosol container comes in Black and Clear.

LIQUID TAPE FAQs

What tin can I use to reduce Liquid Record Electrical if information technology becomes also thick or if I need a thinned downward Liquid Tape blanket for my application?

Yous can add 10-20% of either Naphtha or Toluene depending on your detail situation or application.

What is dielectric force?

Dielectric strength refers to a material'south power to insulate against electrical daze. Liquid Tape Electrical is rubber-based, provides excellent electric insulation, and is suitable for all types of household applications. Further dielectric information is available upon request.

Tin can Liquid Tape Electrical be removed?

Yes, carefully cutting and pare Liquid Record Electrical from the repair area. (Be sure to follow all health and condom warnings too as local electrical codes when working with electricity).